Post by Joezetti on Mar 25, 2008 20:10:28 GMT 1
yesterday me and dad started work on my scooot 
this gave me and dad an excuse to get a new tool kit . we got to work. i took off the carb, undid the shocker, undid the swing arm bolt (with a little persuasion from mr hammer) dropped the engine out, took off the carb manifold, took the head barrel and piston off (omg how small was the piston). then we moved on to the primmy. i started the primmy after din dins (dad went in the tub). he said do exactly what we just did so i set to work. it turns out that the primmy has a full tank of go go juice so it dripped when i removed it. 
i took the carb off , undid the shocker then attempted at the swing arm bolt i got it undone. . then started to use mr hammer and the scooter slipped and moved so i couldn't see the bolt to tap it out.
to be continued
ps: andy needs to start persuading your panells back into shape
this gave me and dad an excuse to get a new tool kit . we got to work. i took off the carb, undid the shocker, undid the swing arm bolt (with a little persuasion from mr hammer) dropped the engine out, took off the carb manifold, took the head barrel and piston off (omg how small was the piston). then we moved on to the primmy. i started the primmy after din dins (dad went in the tub). he said do exactly what we just did so i set to work. it turns out that the primmy has a full tank of go go juice so it dripped when i removed it. i took the carb off , undid the shocker then attempted at the swing arm bolt i got it undone. . then started to use mr hammer and the scooter slipped and moved so i couldn't see the bolt to tap it out. to be continued
ps: andy needs to start persuading your panells back into shape
