|
|
Post by rubberdub on Dec 16, 2009 22:17:15 GMT 1
 im after a welder to do a bit work on beetle any recommendations 
|
|
|
|
Post by fast65 on Dec 16, 2009 22:26:53 GMT 1
i got a seigen 160 from ebay for £160 brand new very good welder just as good as my old sealey one
andy
|
|
|
|
Post by steve66! on Dec 16, 2009 22:27:59 GMT 1
I had a cheap SIP- it was crap! my clarke is much better, its still cheap and not perfect, but much better than the SIP, its all about current (Amperage-if you're not a techy) get gas-cheaper than gasless wire unless you're welding outside-if you are gasless doesn't get blown away so the shroud around the weld is there, get a turbo (fan assisted) if you're doing a lot of welding, otherwise it will overheat and cut out for a while.
Steve
|
|
|
|
Post by steve66! on Dec 16, 2009 23:10:47 GMT 1
someone to weld or a welder to do it yourself?
|
|
|
|
Post by shaun61 on Dec 18, 2009 4:35:37 GMT 1
|
|
|
|
Post by rubberdub on Dec 18, 2009 19:21:54 GMT 1
|
|
If you need a welder give Ben a shout "top welder " very good ,and top guy........................ 
