|
|
Post by spindizzee on Jun 7, 2010 16:05:29 GMT 1
Hi all. Can anyone tell me if this is a RHD or a LHD Beam please.   Many thanks  |
|
|
|
Post by fast65 on Jun 7, 2010 21:31:27 GMT 1
it looks rhd  but you can make them fit any how |
|
|
|
Post by spindizzee on Jun 8, 2010 7:06:08 GMT 1
Cheers dude. The bracket between the tubes on the right hand side in the pic thru me off. I dont seem to have that bracket on the beam fitted to Burp.
|
|
|
|
Post by fast65 on Jun 8, 2010 16:54:08 GMT 1
looks as its a lhd drive converted to rhd
|
|
|
|
Post by spindizzee on Jun 9, 2010 7:05:16 GMT 1
Apart from the bearing seals and grease nipples, is there anything else you would recommend i buy when fitting a new beam dude?
|
|
|
|
Post by steve66! on Jun 9, 2010 18:18:28 GMT 1
that bracket is for the steering damper.
Looks RHD to me.
|
|
|
|
Post by fast65 on Jun 9, 2010 18:38:39 GMT 1
Apart from the bearing seals and grease nipples, is there anything else you would recommend i buy when fitting a new beam dude? new bolts for the beam just in case the old ones are fooked |
|
|
|
Post by spindizzee on Jun 9, 2010 20:20:20 GMT 1
|
|
but you can make them fit any how
