|
|
Post by wheelsleeper on Jul 8, 2010 20:24:56 GMT 1
Hey guys. I need to fit a sump to a mk2 golf 1.3 but i cant get to two of the bolts as the seem to be under the gearbox. Am i being really stupid or what but if i don't get it done soon im not getting it done for bug jam. Steve seemed to get it of easy peasy so i must be missing something. Help please quick haha. Martyn
|
|
|
|
Post by axenige on Jul 8, 2010 22:52:38 GMT 1
There is a quarter section of pressed metal which makes up the bottom section of the front of the Bell housing, basically this is a clutch inspection plate or cover, remove this and it will allow access to the rear two bolts which hold the sump pan on ;D P.S. some models of Flywheel have two slots machined in the back face of the fly wheel plate, this is to allow access to the bolt heads using a socket and drive, The Polo is one I can't remember if the Golf is the same.  Nige. |
|
|
|
Post by wheelsleeper on Jul 9, 2010 19:05:34 GMT 1
I will give that a go mate thanks dude!!
|
|
|
|
Post by steve66! on Jul 11, 2010 8:25:17 GMT 1
this golf is the same as its the same engine!
|
|
|
|
Post by wheelsleeper on Jul 19, 2010 17:47:24 GMT 1
woooooo i did it (with a call to steve haa)
|
|
|
|
Post by steve66! on Jul 23, 2010 23:17:11 GMT 1
my staff were confused with the stuff i was chatting about... but then they are just teachers so know next to nothing about the real world!
|
|
